Finding the right oil for your 2017 Jeep Cherokee is more important than many drivers realize. The oil you choose can affect everything from engine performance to how long your Jeep lasts. If you pick the wrong type, you risk more wear, poor fuel economy, and even engine damage. But with so many oil options in stores, it’s easy to feel confused. This guide breaks down exactly what you need, why it matters, and how to make the best choice for your 2017 Cherokee—whether you have the 2.4L or 3.2L engine.
Recommended Oil Types For 2017 Jeep Cherokee
Jeep’s official recommendation depends on your engine size. Using the right oil helps your Jeep run smoothly and protects your warranty.
2.4l Tigershark Engine
For the 2.4L Tigershark engine, Jeep recommends SAE 0W-20 full synthetic oil. This oil has a low viscosity for easy cold starts and strong protection under heat.

3.2l Pentastar V6 Engine
The 3.2L Pentastar V6 engine needs SAE 5W-20 full synthetic oil. This is a bit thicker when cold but still flows well for reliable protection.
Why Synthetic Oil?
Both engines require full synthetic oil. Synthetic oil resists breakdown better than regular oil, especially in extreme temperatures. It keeps the engine clean and reduces friction for better fuel economy.
Oil Capacity And Change Intervals
Knowing how much oil to use and when to change it prevents both overfilling and engine strain.
Oil Capacities
| Engine | Oil Capacity (with filter) |
|---|---|
| 2.4L Tigershark | 5.5 quarts (5.2 liters) |
| 3.2L Pentastar V6 | 6.0 quarts (5.7 liters) |
Change Intervals
- Normal driving: Change oil every 7,500-10,000 miles or once per year.
- Severe conditions: Change every 5,000 miles. Severe driving includes dusty roads, short trips, or towing.

Choosing The Right Oil Brand
Not all synthetic oils are the same. Jeep recommends using oils that meet MS-6395 (2.4L) or MS-13340 (3.2L) standards. Look for these on the label.
Popular Brands
- Mopar (OEM)
- Pennzoil Platinum
- Mobil 1
- Castrol EDGE
Buying certified oil protects your engine and keeps your warranty safe. If you use a different brand, always check the certification.
Key Factors When Selecting Oil
Picking oil isn’t just about viscosity. Here are important things to check:
- Certification: Only use oil certified for Chrysler/Jeep standards.
- Viscosity: Stick to 0W-20 (2.4L) or 5W-20 (3.2L).
- Full Synthetic: Don’t use blends or conventional oil.
- Additives: Some brands add cleaning agents. These help keep engines free of sludge.
One insight many drivers miss: even “high mileage” synthetic oils may not meet Jeep’s specs. Always read the fine print.
Oil Filter Choices
A quality oil filter matters as much as the oil. Use filters designed for your Cherokee’s engine.
- Mopar filters are best for warranty and fit.
- Other options: Fram Ultra, WIX, or Bosch—just ensure they fit Jeep’s specs.
Low-quality filters can let dirt into the engine, undoing the benefits of synthetic oil.
Common Mistakes To Avoid
Many Jeep owners make these errors:
- Using conventional oil to save money. It can shorten engine life.
- Mixing different viscosity oils. Always use what’s recommended for your engine.
- Skipping the filter change. Old filters can clog and cause oil starvation.
- Overfilling or underfilling. Both hurt performance and may trigger warning lights.
A non-obvious tip: Check oil level a few minutes after turning off the engine, not when cold, for the most accurate reading.
How To Change The Oil In A 2017 Jeep Cherokee
Doing your own oil change? Here’s a quick overview:
- Warm up the engine for a few minutes.
- Lift and secure the vehicle.
- Remove the drain plug and let oil drain into a pan.
- Replace the oil filter.
- Reinstall the plug and add new oil—check the dipstick to avoid overfilling.
- Run the engine and check for leaks.
Always dispose of old oil properly at a recycling center.
Cost Comparison: Diy Vs. Professional Oil Change
What’s Cheaper—doing It Yourself Or Using A Shop?
| Service Type | Estimated Cost |
|---|---|
| DIY (synthetic oil + filter) | $40 – $65 |
| Dealership/Mechanic | $70 – $120 |
DIY saves money but takes time and effort. Dealerships often include a multi-point inspection.

Weather And Driving Conditions
If you live in very hot or cold climates, synthetic oil still performs better than conventional oil. For towing or mountain driving, stick to the same viscosity Jeep’s recommendations already account for these conditions.
Where To Buy The Right Oil
You can find certified synthetic oil at:
- Jeep dealerships
- Auto parts stores (like AutoZone, O’Reilly)
- Large retailers (Walmart, Amazon)
Check the bottle for “Meets Chrysler MS-6395/MS-13340” to be sure.

Frequently Asked Questions
What Happens If I Use The Wrong Oil Viscosity?
Using the wrong viscosity, like 10W-30 instead of 0W-20 or 5W-20, may cause poor lubrication. This can lead to engine noise, less fuel efficiency, and even engine damage over time.
Can I Switch Between Synthetic Oil Brands?
Yes, you can switch brands, but always use full synthetic and check the label for Jeep’s certification. Mixing brands between oil changes is safe if you follow these rules.
How Do I Know When My Oil Needs Changing?
Check the oil life monitor on your Jeep’s dashboard. It tracks oil condition based on driving, not just mileage. Also, look for changes in oil color or texture.
Do I Need To Use Mopar Oil For My Warranty?
Mopar is recommended, but you can use any oil that meets Jeep’s specifications. Keep receipts and make sure the oil meets Chrysler MS-6395 or MS-13340 for warranty protection. For more details, see the official Jeep maintenance guide.
Is High-mileage Oil A Good Idea For My 2017 Cherokee?
Not always. High-mileage oil is for older engines with leaks or burning issues.
Stick to Jeep’s recommended full synthetic unless your engine has over 100,000 miles and needs extra help.
Choosing the right oil for your 2017 Jeep Cherokee protects your investment, saves on repairs, and keeps your SUV running strong. By following these tips and staying on schedule, you can enjoy reliable performance for years to come.






















