If you own a 1998 Jeep Wrangler or are thinking about buying one, understanding the transmission is important. The transmission affects how your Jeep drives, how much fun you have off-road, and even how much you spend on repairs.
Many people are unsure about which transmission came with this model year. Let’s make it easy to understand, with clear facts, real-world examples, and practical advice.
Transmission Options In A 1998 Jeep Wrangler
The 1998 Jeep Wrangler (also called TJ) came with two main types of transmission: manual and automatic. Both had their own strengths and weaknesses.

Manual Transmission: Ax-15
Most 1998 Wranglers with manual gearboxes used the AX-15 transmission. This was a 5-speed manual made by Aisin. The AX-15 was used in both the 4.0L 6-cylinder engine and some 2.5L 4-cylinder Wranglers.
- Gear ratios: 3.83 (1st), 2.33 (2nd), 1.44 (3rd), 1.00 (4th), 0.79 (5th)
- Strength: Reliable, smooth shifting, good for off-roading
- Weakness: Some owners found the clutch pedal heavy
Automatic Transmission: 32rh
If you wanted an automatic, the 32RH was your option. This is a 3-speed automatic used with the 4.0L engine.
- Gear ratios: 2.74 (1st), 1.54 (2nd), 1.00 (3rd)
- Strength: Simple design, easy driving, less shifting in city traffic
- Weakness: Only 3 gears, so not as fuel-efficient as newer automatics
Special Case: Nv3550
Some later 1998 Wranglers with 4-cylinder engines had the NV3550 manual transmission. However, most had the AX-15. The NV3550 is also a 5-speed manual but was more common in newer TJs.
Engine & Transmission Pairing
Not all transmissions were available for every engine. Here’s how they matched up:
| Engine | Transmission | Type |
|---|---|---|
| 2.5L I4 | AX-15 | Manual |
| 4.0L I6 | AX-15 / 32RH | Manual / Automatic |
Comparing Manual Vs Automatic
Choosing between manual and automatic is more than just a matter of taste. Here’s a comparison to help you decide:
| Transmission | Pros | Cons |
|---|---|---|
| Manual (AX-15) | Better control, more fun off-road, lower maintenance cost | Requires more effort, clutch wear, not ideal for city driving |
| Automatic (32RH) | Easy driving, less fatigue, good for traffic | Lower fuel economy, less control off-road, higher repair cost |

How To Identify Your Wrangler’s Transmission
You may not know which transmission is in your Jeep. Here are simple ways to check:
- Look at the gear shifter: Manuals have a stick shift, automatics have a PRNDL shifter.
- Check under the hood: The AX-15 has a cast aluminum case, the 32RH is larger and heavier.
- VIN or sticker: The transmission code may be on the sticker inside the driver’s door or in the VIN (Vehicle Identification Number).
- Ask a mechanic: If you’re still not sure, a professional can help.
Common Issues With 1998 Wrangler Transmissions
Both the AX-15 and 32RH are strong, but they can have problems as they age.
- AX-15: Sometimes has trouble shifting into second gear, especially in cold weather. Clutch can wear out after 100,000 miles.
- 32RH: May develop leaks, especially around the pan gasket. Shifting can get rough if fluid is old.
Practical tip: Change your transmission fluid every 30,000 miles for longer life.

Real-world Examples
Many owners prefer the manual AX-15 for off-roading. You can control your speed better on rocky trails. On the other hand, drivers who use their Jeep in the city often choose the 32RH automatic for easier driving.
One beginner mistake is buying a manual if you don’t know how to use a clutch. It can be frustrating and costly if you grind the gears.
Upgrades And Modifications
Some Jeep fans swap their transmission for performance. For example, installing a NV3550 in place of the AX-15 can give smoother shifting. Others add transmission coolers to the 32RH for better reliability.
Before you upgrade, check if the swap is legal in your state and if it fits your engine.
Transmission Maintenance Tips
Keep your transmission running well with these simple steps:
- Change the fluid regularly
- Check for leaks under your Jeep
- Don’t force the shifter
- Listen for strange noises when driving
Ignoring these signs can lead to expensive repairs.
Transmission Data Compared To Other Years
The 1998 Wrangler’s transmission is simpler than newer models. Here’s how it stacks up:
| Year | Manual | Automatic | Number of Gears |
|---|---|---|---|
| 1998 | AX-15 | 32RH | 5 (manual), 3 (auto) |
| 2005 | NSG370 | 42RLE | 6 (manual), 4 (auto) |
This shows the 1998 Jeep Wrangler had fewer gears, making it easier to fix but less efficient.

Frequently Asked Questions
What Is The Most Common Transmission In A 1998 Jeep Wrangler?
The AX-15 manual is the most common, especially with the 4.0L engine. Automatics are less common but available.
How Do I Know If My Wrangler Has The Ax-15 Or 32rh?
Check the gear shifter and look for the transmission code on the driver’s door sticker. Manuals have a stick shift, automatics have PRNDL.
Can I Swap The Transmission In My 1998 Wrangler?
Yes, but you need to match the transmission to your engine and check local laws. Some swaps require new driveshafts or computer changes.
Is The Ax-15 Good For Off-roading?
Yes, the AX-15 is reliable and gives better control on rough terrain. Many off-roaders prefer it over the automatic.
Where Can I Find More Technical Details About Jeep Transmissions?
For detailed specs and history, visit the Wikipedia Jeep Transmission List.
Knowing which transmission is in a 1998 Jeep Wrangler helps you drive smarter, maintain your vehicle, and even plan upgrades. Whether you want more control for off-roading or easier city driving, the right transmission makes a big difference. Use the tips above, check your Jeep’s codes, and enjoy the ride.






















