Can You Flat Tow a Jeep Cherokee Trailhawk? Towing Guide

Every Jeep owner knows the thrill of adventure. But before you hit the road with your RV, you might wonder: Can you flat tow a Jeep Cherokee Trailhawk?

Flat towing means pulling your vehicle with all four wheels on the ground, often behind a motorhome. This method is popular for its ease and convenience, but not every car can handle it.

Let’s dive into the specifics for the Jeep Cherokee Trailhawk, so you know exactly what to expect and how to avoid costly mistakes.

Understanding Flat Towing

Flat towing, also known as dinghy towing, is a way to pull a car without using a trailer or dolly. It saves space and lets you drive your Jeep once you arrive at your destination. But flat towing works only for certain vehicles. The main concern is the transmission. Some cars suffer damage if their wheels spin while the engine is off. That’s why checking your owner’s manual and the car’s specs is essential.

Jeep Cherokee Trailhawk: Flat Towing Capability

The Jeep Cherokee Trailhawk stands out as an adventure-ready SUV. Many Jeep models are known for being easy to flat tow, but not all Cherokees are the same. Here’s what you need to know:

For the 2014-2022 Cherokee Trailhawk, flat towing is possible if it has the Active Drive II or 4WD system. These systems allow you to shift the transfer case into neutral, which prevents transmission damage. However, newer models sometimes change specs, so always check the latest manual.

Steps To Flat Tow Your Jeep Cherokee Trailhawk

If your Trailhawk meets the requirements, follow these steps:

• Prepare the vehicle: Park on a flat surface and engage the parking brake.
• Shift transfer case: Move the transfer case to neutral (N). This disconnects the wheels from the transmission.
• Set transmission: Leave the transmission in park (P).
• Release parking brake: Once the transfer case is in neutral, release the brake.
• Attach tow bar and safety chains: Securely connect your Jeep to the tow vehicle.
• Check lights: Make sure brake lights and turn signals work.

These steps may seem simple, but skipping one can cause serious damage. The transfer case must be in neutral, not just the transmission.

Key Differences: Cherokee Trailhawk Vs Other Cherokees

Not every Jeep Cherokee can be flat towed. The Trailhawk’s special Active Drive II system sets it apart. Compare below:

The main reason is the transmission and the transfer case. Models with only front-wheel drive (FWD) do not have a transfer case. This makes flat towing impossible without damaging the transmission.

Common Mistakes When Flat Towing

People often make errors that lead to costly repairs:

• Forgetting to shift the transfer case to neutral: This is the most common mistake. It can destroy the transmission in minutes.
• Using the wrong tow equipment: Not all tow bars fit every Jeep. Double-check compatibility.
• Ignoring weight limits: The Trailhawk weighs about 4,200 lbs. Make sure your RV or tow vehicle can handle it.
• Failing to check lights: Working brake and turn signals are required by law.
• Skipping the owner’s manual: Always read your manual for model-specific steps.

A surprising insight: Many beginners don’t realize that leaving the transmission in neutral isn’t enough. The transfer case must be in neutral, or you risk major damage.

Practical Tips For Safe Flat Towing

Flat towing isn’t just about hooking up and driving. Here are some tips to keep your Trailhawk safe:

• Inspect tires and brakes before every trip. Flat towing can wear out tires faster.
• Install a supplemental braking system. This helps your Jeep stop safely when the RV brakes.
• Check the battery. Some systems need power during towing to keep electronics working.
• Use high-quality safety chains. Cheap chains can break under stress.

Another non-obvious tip: If you tow often, consider a driveshaft disconnect kit. This makes the process easier and prevents wear.

Flat Towing Vs Other Towing Methods

Flat towing isn’t your only option. Here’s how it compares:

Flat towing is perfect for the Trailhawk, but only if your model fits the criteria.

Frequently Asked Questions