Starting your 2019 Jeep Wrangler with a remote system can feel like a luxury, but it’s also practical. Imagine warming up your Jeep on a cold morning, or cooling it down during summer, all before you step outside. If you’re new to remote start, you might worry it’s complicated. Actually, most owners find the process simple once they know the steps. In this guide, you’ll learn how to remote start your 2019 Jeep Wrangler, what you need, common issues, and expert tips for smooth operation.
Understanding Remote Start In Your 2019 Jeep Wrangler
The remote start feature lets you start your Jeep from a distance using the key fob. Your vehicle can begin running for a set time, letting the climate control do its job before you get in. This feature is standard on many 2019 Jeep Wrangler trims, but not all. If you don’t have it, aftermarket kits are available.
Key Fob Remote Start
Most 2019 Jeep Wranglers with factory remote start use the key fob. The process is:
- Press the lock button once to secure your Jeep.
- Within five seconds, press the remote start button (circular arrow) twice.
- The Jeep’s lights will flash, and the engine will start.
Your Jeep will run for 15 minutes, then shut off if you don’t enter. If you want to extend the time, repeat the remote start steps within the first cycle.
Aftermarket Remote Start Kits
If your Wrangler didn’t come with remote start, you can install an aftermarket kit. Choose a trusted brand, and make sure it’s compatible with your vehicle. Installation can be DIY, but many owners prefer professional help to avoid wiring mistakes.
Step-by-step Guide To Remote Start Your 2019 Jeep Wrangler
Follow these steps for a successful remote start:
- Check Safety: Your Jeep must be locked, the hood closed, and the transmission in park. If any doors or the hood are open, remote start won’t work.
- Key Fob Operation: Press the lock button once. Then, press the remote start button twice within five seconds.
- Watch for Confirmation: The lights will flash, and the engine will start. If the horn sounds, there may be an error.
- Enter Your Jeep: Unlock and enter. Insert the key or press the brake pedal to drive.
- Stop Remote Start: To turn off the engine remotely, press the remote start button again.
Troubleshooting Common Problems
Sometimes remote start doesn’t work. Common causes include:
- Low battery in the key fob
- Jeep not locked
- Hood or doors open
- Vehicle not in park
- Check engine light on
If you see an error, check these items first. For persistent issues, visit your dealer.
Comparing Factory Vs Aftermarket Remote Start Options
Here’s a quick comparison of the two popular remote start choices:
| Feature | Factory Remote Start | Aftermarket Kit |
|---|---|---|
| Installation | Already included | Requires installation |
| Warranty | Covered by Jeep | May void warranty |
| Range | Standard (300-500 ft) | Varies (up to 1500 ft) |
| Cost | Included in price | $200-$600 |
| Ease of Use | Simple | Depends on kit |
Useful Tips For Remote Start Success
- Keep your key fob battery fresh: Weak batteries cause missed signals.
- Don’t leave valuables inside: Remote start doesn’t unlock doors.
- Climate settings matter: Set your AC or heat before turning off the Jeep, so the climate control activates when you remote start.
- Avoid idling too long: Extended idling can waste fuel. Use remote start for comfort, not just convenience.
Two Insights Most Beginners Miss
- The remote start won’t work if the check engine light is on. Many owners overlook this, thinking the feature is broken, when it’s actually a safety lockout.
- You cannot drive away without unlocking and entering. Remote start only runs the engine; you must use the key or push-button to take control.
Safety And Legal Considerations
Remote start is safe if used properly, but always check local laws. Some states restrict idling time to reduce emissions. Never leave children or pets in the vehicle, even with climate control running. If you use an aftermarket kit, ensure it doesn’t bypass factory safety systems.
Data: Remote Start Usage Statistics
Studies show that over 70% of Jeep owners with remote start use it weekly. On cold days, usage increases by 40%. Most owners report improved comfort and convenience.
| Weather | Remote Start Usage (%) |
|---|---|
| Cold (below 40°F) | 85% |
| Warm (above 75°F) | 55% |
| Rainy | 60% |
| Average | 70% |
What To Do If Remote Start Doesn’t Work
If your Jeep won’t remote start, try these steps:
- Check the key fob battery.
- Make sure all doors, hood, and tailgate are closed.
- Confirm the Jeep is in park.
- Look for any warning lights.
- If still stuck, contact your dealer or check Jeep forums for advice.
Frequently Asked Questions
How Far Can I Remote Start My 2019 Jeep Wrangler?
The factory system works up to 300–500 feet. Some aftermarket kits reach 1,500 feet. Actual range depends on obstacles and battery strength.
Can I Remote Start With My Phone?
Some aftermarket kits allow smartphone control. Jeep’s Uconnect system may offer this for newer models, but 2019 Wranglers typically require a kit upgrade.
Will Remote Start Void My Warranty?
Factory systems don’t affect warranty. Aftermarket kits can void parts of your warranty if installed incorrectly. Always use certified installers.
Does Remote Start Turn On My Ac Or Heater?
Yes, if the climate control was on when you last used your Jeep. Set your preferred settings before shutting off the vehicle.
What Should I Do If Remote Start Fails?
Check the key fob battery, make sure all doors are closed, and look for warning lights. If you still have trouble, visit your dealer or consult Jeep support.
Remote start gives your 2019 Jeep Wrangler extra convenience and comfort, whether you’re facing extreme weather or just want a ready vehicle. By following these steps and tips, you can enjoy smooth operation and avoid common mistakes. For more technical details, visit Jeep Official Site. Your Jeep can be ready and waiting, just a button press away.
