Installing Xprite Jeep headlights is a popular upgrade for Jeep owners who want better night vision and a modern look. If your factory headlights seem dim or outdated, switching to Xprite LEDs can make a big difference.
This guide walks you through every step, explains what tools you need, and offers pro tips that even many mechanics miss. Whether you’re a first-time DIYer or have some experience, you’ll find clear, practical help here.
Why Upgrade To Xprite Jeep Headlights?
Most stock Jeep headlights are halogen. They’re not very bright, especially on older Wrangler models. Xprite LED headlights offer:
- Brighter light: Up to 3 times more lumens than halogen.
- Longer life: LEDs often last over 30,000 hours.
- Custom styles: Choose from halo rings, colored DRLs, and smoked lenses.
Here’s how Xprite compares to factory Jeep headlights:
| Feature | Stock Halogen | Xprite LED |
|---|---|---|
| Lumens | 900-1,200 | 3,600-6,000 |
| Color Temperature | 3,000K (yellow) | 6,000K (white) |
| Expected Lifespan | 1,000 hrs | 30,000+ hrs |
What You Need Before Starting
A smooth install starts with the right tools and preparation. Gather these items first:
- Xprite Jeep headlights (make sure they fit your model year)
- Phillips screwdriver
- Flathead screwdriver
- T-15 Torx driver (for some models)
- Dielectric grease (for better electrical contact)
- Zip ties (for neat wiring)
- Work gloves
Check your Jeep’s manual for any model-specific details. Some 2007-2018 Wranglers need an H4-H13 adapter (usually included).
Step-by-step Xprite Headlight Installation
1. Park And Power Down
Park your Jeep on level ground. Turn off the engine and disconnect the negative battery terminal for safety.
2. Remove The Front Grille
Open the hood. Use a flathead screwdriver to pop up the plastic clips on the grille.
There are usually six along the top. Gently pull the grille forward to unclip the bottom.
3. Take Out The Old Headlights
Find the metal retaining ring around each headlight. Remove the screws (usually Phillips or Torx) and set the ring aside.
Pull the headlight out and disconnect the wiring harness.
4. Connect New Headlights
Plug the Xprite headlight into the factory harness. If your Jeep uses an adapter, connect it now.
Add a dab of dielectric grease to the connectors to prevent corrosion an extra step many beginners skip.
5. Secure The Headlights
Put the headlight into the bucket. Reattach the retaining ring and tighten the screws evenly.
Make sure the headlight sits flush with the grille.
6. Wire Halo Or Drl (if Equipped)
Some Xprite headlights include a halo or Daytime Running Light wire. This often connects to a fuse tap or the parking light wire. Use zip ties to keep wires away from hot or moving parts. Double-check the wiring diagram provided by Xprite.
7. Reinstall The Grille
Push the grille back into place, lining up the clips. Press down firmly on each clip, then reinstall the top plastic pins.
8. Reconnect Battery And Test
Reconnect the battery. Turn on your Jeep and test the headlights.
Try low beam, high beam, and any DRL/halo features. If something doesn’t work, check the connections before closing the hood.
Common Mistakes And How To Avoid Them
Even confident DIYers can make errors. Here’s what to watch for:
- Forgetting the retaining ring: Without it, the headlight can rattle or fall out.
- Loose connections: Always push connectors in until they click.
- Wrong polarity: If the LED doesn’t light up, unplug and flip the connector.
- Not aiming headlights: New headlights need proper adjustment for safe driving.
Adjusting Your Headlights
After installation, your new Xprite headlights may shine too high or low. Proper aim is crucial.
Park about 25 feet from a wall and measure the light beam. The top of the beam should be slightly below the center of your headlight.
Adjust using the screw near the headlight bucket.
Here’s a quick aiming reference:
| Distance from Wall | Ideal Beam Height |
|---|---|
| 25 ft | 2-3 inches below headlight center |
| 50 ft | 4-5 inches below headlight center |
Don’t skip this step improperly aimed headlights can blind other drivers and might be illegal.
Xprite Jeep Headlights: Real-world Results
Jeep owners often report much better night driving with Xprite LEDs. A 2018 Wrangler user said, “I can finally see deer on the side of the road, even in the rain.
” Many users also like the modern style and custom halo colors.
Some Xprite models are DOT-approved, meaning they meet road safety standards. Always check your local laws, especially for colored halos or DRLs.
Extra Tips For First-time Installers
- Take before-and-after photos to compare light output.
- Test all features before putting tools away.
- If you see flickering, you may need an anti-flicker harness (Xprite often includes this).
- Store your old headlights—they can be handy in emergencies.
For more Jeep lighting ideas, check out this expert guide.
Upgrading to Xprite headlights is a smart investment in both safety and style. With careful installation and a bit of patience, you can get pro-level results at home.
Frequently Asked Questions
Are Xprite Jeep Headlights Plug-and-play?
Most Xprite headlights are plug-and-play for Jeep Wranglers from 2007 and up. Some require an adapter or extra wiring for DRL or halo features.
Will These Headlights Fit My Jeep Model?
Check the product listing and your Jeep’s manual. Xprite makes versions for Wrangler JK, JL, TJ, and other models. Always match the headlight size and connector type.
Do I Need Any Extra Parts For Installation?
You may need an H4-H13 adapter or anti-flicker harness, depending on your Jeep’s year. Most kits include what you need, but check before starting.
How Do I Fix Headlight Flicker?
Flickering is usually caused by the Jeep’s electrical system. Use the supplied anti-flicker harness or buy one separately if needed.
Are Xprite Led Headlights Street Legal?
Most white Xprite headlights are DOT-approved, but colored halos or custom DRLs may not be legal everywhere. Check your state’s laws before installing.
Upgrading your Jeep’s headlights is one of the most effective changes you can make for both safety and style. With the right tools and this clear guide, you’ll be ready to light up the road in no time.
