How Much Oil For 2019 Jeep Cherokee

Some links on this site are affiliate links. If you make a purchase, we may earn a commission at no extra cost to you. Your support helps keep our content free.

If you own a 2019 Jeep Cherokee, you know regular maintenance keeps your SUV running smoothly. One of the most important tasks is changing the engine oil.

But many owners are not sure how much oil their 2019 Jeep Cherokee really needs, which oil type to use, and how to avoid common mistakes.

This guide covers everything you need to know, so you can protect your engine and get the most out of every mile.

how much oil for 2019 jeep cherokee

Understanding Oil Capacity For The 2019 Jeep Cherokee

The 2019 Jeep Cherokee comes with several engine options. Each engine has a different oil capacity. Using the right amount is important—too little can cause engine damage, and too much can lead to leaks or poor performance.

Engine Options And Oil Requirements

There are three main engines available for the 2019 Cherokee:

  • 2.4L Tigershark MultiAir I4
  • 3.2L Pentastar V6
  • 2.0L Turbo I4

Below is a quick look at oil capacities for each engine.

EngineOil Capacity (with filter)Recommended Oil Type
2.4L Tigershark I45.5 quarts (5.2 liters)SAE 0W-20
3.2L Pentastar V65.9 quarts (5.6 liters)SAE 0W-20
2.0L Turbo I45.0 quarts (4.7 liters)SAE 5W-30

How To Check And Add The Right Amount Of Oil

If you want to check or top off your oil, follow these steps to avoid mistakes:

  • Park on Level Ground: Always check oil when the car is on a flat surface.
  • Wait for Cool Down: Let the engine rest for at least 10 minutes.
  • Pull Out the Dipstick: Wipe it clean, reinsert, then pull out again.
  • Check the Level: The oil should be between the “Min” and “Max” marks.
  • Add Small Amounts: If needed, add oil slowly—usually 1/4 quart at a time.

Many beginners miss that oil can take a few minutes to settle in the pan. Always recheck the dipstick after a few minutes, especially if the engine was running before.

How Much Oil For 2019 Jeep Cherokee: Complete Guide

Choosing The Right Oil For Your Jeep Cherokee

Selecting the correct oil type is just as important as the amount. Using the wrong oil can void warranties or cause engine wear.

Recommended Oil Types

  • 2.4L and 3.2L engines: Use SAE 0W-20. This is a synthetic oil designed for fuel efficiency and engine protection.
  • 2.0L Turbo engine: Use SAE 5W-30. This oil handles the higher demands of a turbocharged engine.

Look for oils that meet Chrysler’s MS-6395 standard for 0W-20 or the MS-13340 standard for 5W-30. These numbers are on the oil bottle’s back label.

Synthetic Vs. Conventional Oil

The 2019 Cherokee requires full synthetic oil. Synthetic oil flows better in cold weather and protects better at high temperatures. Don’t use conventional oil in these engines.

Oil Change Frequency And Best Practices

Changing oil at the right time is critical. Jeep recommends oil changes every 7,500 miles or once a year, whichever comes first. But if you drive in severe conditions—like dusty roads, towing, or extreme heat—change it every 5,000 miles.

Oil Filter Replacement

Always replace the oil filter at every oil change. A dirty filter can reduce oil flow and harm your engine.

Typical Oil Change Costs

Oil change prices can vary. Here’s a comparison:

LocationCost RangeIncluded Services
Dealership$70–$100Oil, filter, inspection
Independent Shop$40–$70Oil, filter
DIY$30–$50Oil, filter only

DIY is the cheapest option, but always dispose of old oil safely many auto shops accept used oil for free.

How Much Oil For 2019 Jeep Cherokee: Complete Guide


Common Oil Change Mistakes To Avoid

  • Overfilling or underfilling oil: Both can damage the engine.
  • Wrong oil type: Using 10W-30 or conventional oil reduces protection.
  • Skipping the filter: Old filters leave dirt in your engine.
  • Not tightening the drain plug: Can cause leaks.
  • Ignoring the oil light: Low oil pressure can destroy your engine fast.

Most new owners overlook the need to check for leaks after an oil change. Always inspect under your Jeep for drips after the job is done.

Signs You Need An Oil Change

Don’t just rely on mileage. Watch for these signs:

  • Oil change light or check engine light
  • Dark, dirty oil on the dipstick
  • Engine runs louder than usual
  • Burning oil smell

If you notice any of these, check your oil level and schedule a change soon.

How Much Oil For 2019 Jeep Cherokee: Complete Guide

Frequently Asked Questions

How Much Oil Does My 2019 Jeep Cherokee Need?

It depends on your engine:

  • 2.4L engine: 5.5 quarts
  • 3.2L V6: 5.9 quarts
  • 2.0L Turbo: 5.0 quarts

What Oil Type Is Best For A 2019 Jeep Cherokee?

Use SAE 0W-20 for the 2.4L and 3.2L engines, and SAE 5W-30 for the 2.0L Turbo. Always use full synthetic oil.

Can I Use Conventional Oil Instead Of Synthetic?

No. The 2019 Cherokee engines are designed for full synthetic oil.

Using conventional oil can reduce engine life and may void your warranty.

How Often Should I Change The Oil?

Change your oil every 7,500 miles or once a year for normal driving. If you drive in tough conditions, change every 5,000 miles.

Where Can I Find Official Oil Specifications?

You can check your owner’s manual or see the official details on the Jeep official website.

Taking care of your 2019 Jeep Cherokee’s engine oil is simple but vital. Use the right amount and type, change it on time, and your SUV will reward you with years of reliable driving.

If you’re ever unsure, ask a trusted mechanic or refer to official Jeep resources for guidance.

Photo of author
Hi there, my name is Nikola. I've spent more than a decade covered in grease and with a big smile on my face, as I've been exploring everything that has an engine. Although Jeeps are my favorite, I have a deep love for all things automotive.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.