Can You Tow an Automatic Jeep Wrangler? Expert Guide & Tips

Some links on this site are affiliate links. If you make a purchase, we may earn a commission at no extra cost to you. Your support helps keep our content free.

Towing a vehicle isn’t just about hooking it up and driving away—especially when it comes to an automatic Jeep Wrangler. Many people love the Wrangler for its rugged build and off-road power, but if you’re considering taking it along behind your RV or truck, there are some important things to know.

Mistakes can lead to expensive damage, and a few small details make a big difference. Let’s break down what you need to consider before towing an automatic Jeep Wrangler, the safest methods, and what can go wrong if you get it wrong.

Can You Tow An Automatic Jeep Wrangler?

Yes, you can tow an automatic Jeep Wrangler, but not in every way. The Wrangler is famous among RV owners because it’s one of the few modern SUVs you can tow “flat”—with all four wheels on the ground. But this does not mean you can simply shift to neutral and go. You must follow Jeep’s guidelines for safe flat towing, or you risk severe transmission damage.

can you tow an automatic jeep wrangler

Flat Towing Vs. Other Methods

There are three main ways people tow cars:

  • Flat towing (all four wheels on the ground)
  • Dolly towing (front wheels on a dolly, rear wheels on the road)
  • Trailer towing (all wheels off the ground)

Here’s a simple comparison:

Towing MethodProsCons
Flat TowingSimple, quick hookup, less equipmentNot all vehicles support it, possible transmission damage if not done right
Dolly TowingWorks for many front-wheel-drive carsNot ideal for 4×4 vehicles, more hardware
Trailer TowingSafest for any car, no wear on towed vehicleHeavy, costly, needs storage

For most automatic Jeep Wranglers (especially recent models), flat towing is possible if you follow specific steps.

Can You Tow an Automatic Jeep Wrangler? Expert Guide & Tips

Steps For Flat Towing An Automatic Jeep Wrangler

Before you tow, check your owner’s manual—Jeep gives year- and model-specific instructions. For most 2012–2024 automatic Wranglers (JK, JL, and Gladiator), the steps are:

  • Start the engine and keep your foot on the brake.
  • Shift the transmission into neutral (N).
  • Shift the transfer case into neutral (N) using the 4WD lever.
  • Confirm the vehicle is in full neutral—no gear engaged.
  • Turn off the engine and put the ignition in ACC (accessory) to prevent steering lock.
  • Release the brake and verify that the vehicle rolls freely.

If your Wrangler has Selec-Trac or Rock-Trac 4×4, steps may vary slightly. Always check your manual, as missing a step can break the transmission.

Why Can’t You Flat Tow Every Automatic?

Most automatic vehicles can’t be flat towed. Their transmissions need the engine running to circulate oil.

Without oil flow, gears overheat and wear out fast. The Jeep Wrangler is designed differently its transfer case, when in neutral, disconnects the transmission from the wheels.

This unique feature is why you can safely flat tow it, but only if you set things up properly.

What Can Go Wrong?

Towing an automatic Wrangler without following the right steps can cause:

  • Transmission failure: If the transfer case isn’t in neutral, the transmission can overheat and fail. Repairs can cost $3,000–$5,000.
  • Drivetrain damage: Leaving the wrong gear engaged puts stress on the transfer case and driveshaft.
  • Steering lock: Forgetting to set the ignition to ACC can lock the steering wheel, making the Wrangler veer dangerously.

These mistakes are common among beginners. Always double-check before towing.

Model Differences: Jk, Jl, And Gladiator

Not all Wranglers are the same. Here’s a quick look at how towing varies by model:

ModelYearsFlat Towable?Key Setup Notes
JK2007–2018YesTransfer case must be in Neutral
JL2018–PresentYesSame as JK, some trims have extra electronics
Gladiator2020–PresentYesFollow Wrangler JL steps
Other Jeep ModelsVariousNot alwaysCheck manual—many are not flat towable

If you have an older Wrangler (TJ, YJ), check the manual. Most can be flat towed, but always confirm.

Can You Tow an Automatic Jeep Wrangler? Expert Guide & Tips


Towing Equipment You Need

To tow your Wrangler safely, you’ll need some specific gear:

  • Tow bar: Connects the Wrangler to your RV or truck.
  • Base plate: Mounts to the Jeep’s frame for secure towing.
  • Safety cables: Backup in case the tow bar fails.
  • Wiring harness: Ensures the Jeep’s brake lights and turn signals work with your tow vehicle.
  • Auxiliary braking system: Required by law in many states for safety.

Don’t skimp on quality. Cheap or wrong parts can cause accidents or void your Jeep’s warranty.

Flat Towing Vs. Trailer Towing: Which Is Better?

Some people debate which method is best. Here’s a quick breakdown:

CriteriaFlat TowingTrailer Towing
CostLower—less equipmentHigher—need trailer
Setup TimeQuickLonger loading/unloading
Vehicle WearMinor, but wheels and bearings still turnNone—Jeep rides on trailer
Storage NeededMinimalLarge—must store trailer

For most RVers, flat towing is easiest, but if you want zero wear and more flexibility, consider a trailer.

Two Insights Beginners Miss

  • Battery drain: Leaving the ignition in ACC for long trips can drain the battery. Many RVers install a battery disconnect switch or carry a jump starter.
  • Insurance coverage: Not all auto insurance covers towing accidents. Call your agent before you tow to confirm you’re protected.

Pro Tips For Safe Towing

  • Practice hookup and unhooking before your first long trip.
  • Stop after a few miles to check connections, cables, and lights.
  • Carry spare pins, fuses, and basic tools in your Jeep.

For more details, check the official Jeep website.

Can You Tow an Automatic Jeep Wrangler? Expert Guide & Tips

Frequently Asked Questions

Can I Tow Any Jeep Wrangler With All Four Wheels On The Ground?

Most 4×4 Jeep Wranglers (JK, JL, Gladiator) can be flat towed if you set the transfer case and transmission to neutral. Always check your owner’s manual for your specific year and model.

What Happens If I Tow An Automatic Wrangler In Park Or Drive?

Towing in park or drive can destroy the transmission. It blocks lubrication flow, causing overheating and rapid damage. Always follow the correct towing steps.

Do I Need A Special Tow Bar For The Jeep Wrangler?

Yes, you need a tow bar rated for the Wrangler’s weight, plus a base plate designed for your model. Generic bars can be unsafe.

Can I Tow My Wrangler If It’s A 2wd Model?

Most 2WD Wranglers are not designed for flat towing. Flat towing usually requires a 4×4 with a neutral transfer case. Trailer towing is safest for 2WD.

Is Flat Towing Legal Everywhere?

Laws vary. Most US states allow flat towing, but some require supplemental brakes or lighting.

Check your state’s DMV website before your trip.

Towing an automatic Jeep Wrangler is absolutely possible, but only if you follow the right steps and use the correct equipment. Doing it wrong can cost you thousands, but with a little preparation, you can bring your Wrangler along for the ride safely and confidently.

Photo of author
Chris is a Jeep Certified Master Technician with extensive experience servicing Chrysler, Dodge, and Jeep vehicles. He has helped more than 32,500 vehicle owners diagnose and repair Jeep problems with dealership-level expertise.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.