So you’re driving your Jeep early one morning, and everything seems to be going as intended until you encounter this message “Stop safely vehicle will shut off soon” as it suddenly appears on your dashboard.
You begin to panic because this has never happened before and are left confused about why. Are you about to have an accident? Is your car engine about to knock? What exactly could have gone wrong?
Many scenarios are running through your mind as you struggle to make sense of what is happening to your vehicle. But what does stopping a safe vehicle will shutting off soon Jeep Compass mean?
For starters, this is an error message that many drivers discuss in online forums frequently, Do rest easy, as your case is not as strange or unique.
This error means that your Jeep’s ESS voltage is low, and the engine is on the verge of shutting down because of it.
The stop-safely vehicle will shut off soon. Dodge Durango error message on your dashboard may occur due to several factors, like a battery isolator issue or issues with the belt, IBS, alternator, or the PCM or ECM.
More than a few factors may cause this error to appear out of the blue. Even a damaged fuse or wiring to components may cause it.
To correct the error, a proper system diagnosis has to be done to discover the issue so steps can be taken to resolve the problem accordingly.
This article highlights the problem and provides a comprehensive set of solutions to resolve the issue and get your vehicle working as well as before.
Addressing Stop Safely Vehicle Will Shut Off Soon in Jeep?
So why does my Jeep Cherokee shut off when I stop, or does this error appear on my dashboard?
This error or warning occurs because of the ESS feature. This feature works with your car’s auxiliary battery, not the main battery.
When this feature cannot work anymore due to poor voltage or even a bad auxiliary battery, it will shut off automatically. If your Jeep Compass says the car will shut off soon, it is because of an issue with the main auxiliary.
The message is a typical warning to the driver that there is a possible fault in the auxiliary battery. If the situation persists, the engine may eventually shut down, and the driver will have to pack the car somewhere safe, so there isn’t an accident like a crash.
This mechanism is programmed into the vehicle by manufacturers to protect drivers if their battery begins to malfunction or develops a fault.
Jeep Stop Safely Vehicle Will Stop Soon: 7 Causes & Solutions
So if your Jeep compass turns off when stopped, there are several reasons why this may occur. Let’s look at the probable issues and how you can fix each one.
Before we proceed, we need to establish the root causes for this issue which are three problem areas; the battery, the charging system, and the vehicle’s electric component. These are the root areas.
| Causes | Warning Signs | Fix |
|---|---|---|
| The battery indicator remains switched on, electronic accessories not working or malfunctioning, burning odor, and a whizzing sound | Dimmed lights, components malfunctioning, battery light on | The battery indicator remains switched on, electronic accessories not working or malfunctioning, burning odor, and whizzing sound |
| Bad Alternator System | The battery indicator remains switched on, electronic accessories not working or malfunctioning, burning odor, and a whizzing sound | Change alternator |
| A weak or loose Serpentine belt | Loss of AC or Steering power, engine overheats, car battery weak or undercharging | Change serpentine belt |
| A Blown fuse | Electrical components stopped working, dimmer lights, power loss | Replace fuse |
| Wiring issue | Battery light/Check engine indicator remains on, components malfunctionality. | Replace wiring |
| IBS Malfunctioning | Battery indicator on, components not functioning | Change IBS |
| PCM or ECM faulty | Check engine indicator light on, vehicle not igniting Engine stall, several DTC codes | Hire a mechanic |
As you can see from the table, there are several reasons why you may begin to see a “stop safely vehicle will shut off soon” message, and we go into detail below for better understanding.
1. Dead/Faulty Battery
If your car has an ESS feature, that means that it has a separate auxiliary power battery for emergencies apart from the major car battery. This battery is responsible for powering the ESS and other systems like the infotainment system.
If the auxiliary battery is bad or defective, this will trigger the stop safely battery mode. If your Jeep uses electric technology, you may see the “Ford focus electric stop safely now” error message.
Some signs that the battery is responsible for this include dimmed lights, battery indicator staying on, or some electrical accessories that may stop working or begin to malfunction.
- Testing and Evaluating Battery Conditions
To diagnose the problem, locate the battery’s position depending on your Jeep’s model. You can find it by consulting the owner manual. Some have it under the other seat opposite the seat.
Check the battery for leaks, cracks, or smells of burnt odor. Check terminals for rusting or defects of any kind. You should also check the voltage using a multimeter for DC voltage measurement.
- Using a Multimeter for Diagnosis
Before you conduct the test, turn off your engine including all the electrical accessories, and then do the connection of the probes to the terminals.
Once they are in place, the device should tell you if the battery is well charged by giving you a low reading below 12.6 volts; if it shows a lower reading, the charging system is faulty.
You need a very good multimeter like this AstroAI Digital with AC/DC Capacity for an accurate reading. Alternatively, you can also try the KAIWEETS Clamp Meter.
If your tests drop from the required 12.6 volts, the next step will be to perform a test to evaluate conditions. You need a special device called a loading tester for such a test.
- Testing Battery Stability
Turn on the engine, connect your loader to your battery terminals, switch the tester to push the load into the auxiliary battery, and observe if it can hold power for up to 15 seconds.
Assuming it drops under 9 volts, this is a confirmation that you have a defective battery.
- Checking Battery Isolator Continuity
Still, on potential battery issues, we will ask you to check the battery isolator. Isolators keep two batteries apart so they don’t discharge current into each other, and they are located in between both batteries as they serve as buffers.
- Replacing Faulty Isolators
Test isolator continuity, and if you don’t see continuity, you will need to change it as this means it is faulty and needs replacement. You can go for Stinger 200AMP Battery Relay. It is affordable and white durable, and you won’t need to buy a new replacement for a long time.
- Solutions for a Bad Auxiliary Battery
If your auxiliary battery is bad, the only solution will be to change it, as fixing it won’t work. Auxiliary batteries cost different prices based on the brand and quality, so prepare a budget of $200 and above.
- Maintaining Battery Terminals
If it is a care of rusted terminals, you can wipe with water mixed with baking soda to remove rust particles. Or better still, paste the solution on the terminals, then leave for an hour before cleaning with water using a rust cleaner.
2. Blown Fuse
If the fuse is blown, several components in the vehicle will not work, even if they are in good condition.
You should know that fuses are meant to protect systems from absorbing excessive current coming from circuits. Should the fuse blow out, this automatically breaks the power connection or causes flow interruption of power from the battery to the components.
This problem will show signs like power loss, and low light, components that will not work well or work at all.
Start by locating the box under your Jeep dashboard or located in the compartment. Check for an image on the box or consult your owner’s manual for directions.
Remove the fuse with a pulley to see the metal filament; you want to evaluate whether the filament is burnt or broken.
Place your multimeter on the filament to check for continuity using probes. If it reads 0, it means nothing is wrong with the fuse. Assuming it reads “infinity“, it means the fuse has blown. A blown-out fuse with a similar amperage must be changed.
3. Identifying Wiring Issues
If all your accessories are in good condition, but the stop safely vehicle will shut off soon jeep compass, the message continues to appear. It may be that your wiring is faulty.
Faulty wires lead to intermittent circuits and power flow. It may be that the wires are burnt, loose, it damaged. To be sure, you must check your wiring connections for all the accessories leading to the system.
Symptoms of Wiring Problems
There are a few ways to know if this error message is caused by a wiring problem. The engine indicator may remain on; you may notice the lights flickering, or some components may not work well.
Areas of Concern
To check for wiring problems, your areas of concern should be the ECM, PCM, UBS, battery, or alternator connections.
Check the wires running to each of these components to evaluate if they’re loose; looseness can bring up this error warning message.
Testing for Loose Wiring
Check by wiggling that wiring to test for looseness.
Another check to conduct is the insulation, as damage to the insulation may cause a circuit. Also, check for rusting, as this may cause a breakdown or voltage resistance.
Inspecting for Damage
Check for damaged or frayed wiring; if any wire is damaged, you must replace them. You want to see if any wires may be melted or burned.
The solution to loose wiring is to reconnect them, but if any wires are frayed or damaged, they need replacement.
4. Understanding IBS Issues
The IBS system in your car means “Intelligent Battery Sensor,” which tracks battery conditions and sends updates to the ECM. Furthermore, a sudden IBM defect will trigger a Jeep stop safely vehicle will shut off soon message.
Symptoms of a Faulty IBS
If the IBM is bad, the battery light will remain on, and components will be affected.
So if you have been asking yourself, “Why does my Jeep compass shut off when I stop” and you want to check if IBM is responsible, you have to run a diagnosis.
Diagnosing IBS Problems
Use a DTC reader by plugging the reader into the port but don’t switch on the engine. The port is found below the dashboard. If the reader gives you an error code, it means the IBS is faulty.
Replacing a Faulty IBS
The only solution to a faulty IBS is to replace it with a new one.
Leave the car to cool off after shutting down the engine, use a screw to lose the IBM mounted on top of the battery, then disconnect the wire harness.
Remove IBS and fix and install another one.
5. ECM/PCM Malfunction
If a faulty PCM or ECM triggers the error message, several error codes may spring up.
Should you suspect these error codes are because of the PCM or ECM, you must hire an experienced auto mechanic to do a detailed diagnosis which will cost you a fee. If one or both are bad, you must replace them with new ones.
6. Defective Alternator
Assuming your battery doesn’t have proper voltage, this may result from the battery charging system. Remember that the alternator is the major component of this system, and if something is wrong, the battery light may remain on.
Furthermore, you may begin to notice a burned smell, malfunctioning accessories, or a whizzing sound.
To test the alternator functionality, use your multimeter to measure the battery voltage, with 12.6 volts being the ideal measurement. Keep the multimeter probes in place, turn on the ignition, and watch.
If the voltage stays between 14.2 – 14.7 volts, the alternator is in good condition; if it drops or exceeds that range, the alternator is bad, and your auxiliary battery is not charging. Replace the alternator.
7. Serpentine Belt Issue
In the previous paragraph, we reviewed the potential issue with the alternator, but what if the serpentine belt is responsible? This belt powers the alternator; if it wears out or is damaged, it will not rotate properly.
You may notice a squealing sound or a loss of Steering or AC power. A bad belt may even lead to overheating, or your battery may stop charging.
To check, you must visually inspect the belt for damages. If you see cracks and tears, it means it has worn out and needs changing. You can get a new one and have a technician fix it for you.
Stop Safely Vehicle Will Shut Off Soon Jeep Compass: Prevention Tips
So if your Jeep Cherokee won’t turn off or you start seeing the stop error message, you already know the steps to take to diagnose the causes and the solutions for each scenario.
How about clever ways to prevent it from happening in the first place? As a start, you must take good care of all the electrical components in your Jeep. Do well to:
- Check your battery often and remove rust, grime, or debris from the terminal using water and baking soda
- Ensure your battery remains charged
- Watch out for warning signs like engine noise
- Observe your alternator
- Always maintain your ECam and IBS systems
- Schedule regular maintenance
Conclusion
Driving your car can be fun if you place a premium on maintenance; however, complications occur when we least expect them.
If you notice the stop safely vehicle Will shut off soon error message, it means that the auxiliary battery has stopped working or is no longer supplying power.
By using the information in this article, you should be able to resolve the problem. Did you find the article informative?
Last update on 2025-08-29 / Affiliate links / Images from Amazon Product Advertising API
