The Jeep Renegade comes with a feature called “Dynamic Steering Torque,” or DST, thanks to its acronym.
While this aspect is meant to help drivers at certain moments, such as maneuvering, it may not work as intended for multiple reasons, leaving users unable to access the steering torque when needed.
While it is common in most Jeep models, the most common error message is the “Jeep Renegade Dynamic Steering Torque Service Required“.
There can be several reasons for this error to appear. Some of the most common causes include the following:
- Malfunctions with the sensors or airbag
- Out-of-date software
- Water ingress
- Faulty components, such as the battery or alternator.
This issue can become even more frustrating since several other error messages may accompany it. It may also be possible for your car to refuse to start, making it seem like the issue is unsolvable. But that is not the case.
If you’ve been experiencing this problem, then this article is for you. We’ve explored different causes and potential fixes to the “dynamic steering torque service required Jeep Renegade” error message and will list them here. Let’s get your car working again!
Learn More About the Dynamic Steering Torque
The DST is included in the Jeep Renegade and several other models. It is intended to provide the driver with steering torque assistance during certain conditions, such as driving through a difficult road or perhaps complicated maneuvers.
A Jeep with the DST feature will include an electric motor on the steering gear, which has the purpose of adjusting the resistance of the steering wheel, taking into account several elements, including the following:
- Vehicle speed
- Prevailing road conditions
This way, the DST allows the driver to ensure their safety and control during the navigation. This makes it easier for the driver to keep an even pace on the road despite the challenges that may appear during the trip, like a tight turn or a slippery road.
What Does Dynamic Steering Torque Service Required Mean?
If this error message appears on your Jeep Renegade, there is a DST problem, and it may not be working anymore.
That means that you may have certain difficulties when going on certain roads, which may diminish your experience with your Jeep. Even if the system is not available, you’ll still be able to drive.
Sometimes, the problem appears, but it may get fixed on its own after a while. If that does not happen, then you should try to fix it as soon as possible to avoid other potential problems.
Signs to Look Out For
This problem has several symptoms you must keep an eye on to avoid having other systems affected. Some of the most common signs include an abnormal feeling when you use the steering wheel or “vibrations” during usage.
Sometimes, your car may also pull to one side. The ABS, ESC, or hill assist light may turn on, and the 4WD may not work anymore.
If you experience these problems and you get the “steering torque service required” message, then it may be time for you to get this issue fixed.
How to Fix Jeep Renegade Dynamic Steering Torque Service Required?
There are several reasons why this problem may appear on your Jeep Renegade. It’s important to determine the cause of the issue fix before moving on to the potential solutions.
1. Faulty Battery
The first place to look out for is the battery. The first step is to check if it is working as intended, and you can do that by inspecting the voltage.
Anything lower than 12V when the engine is off may be a sign of a charging problem.
You can first try recharging the battery, and if that does not work, then maybe the battery is faulty and may need to be replaced.
Once you’ve replaced the battery or fixed the charging problem, we recommend you drive for a little while and see if the error message has disappeared.
If it has not, maybe the issue is somewhere else. Battery voltage drops are listed as one of the most common causes of issues in this context, so it’s important to check them out now and then.
2. ABS Failure
Sometimes, the anti-lock brake system or ABS may fail. You may get several error messages, which may prevent you from using your vehicle as intended.
If the ABS is malfunctioning, that may mean that some of its internal components are faulty, which also means that it is sending incorrect information to the DST system.
Therefore, it causes your screen to have the DST system to fail.
In this case, what’s recommended is to inspect the wiring and electronics of the ABS module and ensure that everything is working as intended.
If not, you may have to do some replacements to get rid of the DST system error.
Furthermore, you should know that whenever the ABS sensor malfunctions and sends incorrect information, the electronic control unit (ECU) will prevent the rest of the systems from working to avoid any other potential issue from happening and keep your vehicle intact.
We recommend you check the ECU, which you can usually find in the interior of the wheel bearing assembly.
In the worst-case scenario, you may have to replace the whole ABS sensor. It may be a bit hard to find the Jeep Wrangler dynamic sensor location at first.
You can conduct the inspection yourself if you use an OBD2 scanner. This way, it’ll be easier for you to find out the exact component that’s failing and have it replaced as soon as possible.
It may save you a lot of time, so if you suspect this is the problem, we invite you to get the scanner and work on it as soon as possible.
3. Unresponsive Wheel Speed Sensor
Sometimes, the wheel sensor may stop working, which may cause the steering torque service required message.
Again, if this happens, you may want to replace the ABS sensor to prevent the whole system from malfunctioning.
4. Water Ingress
Another aspect you may want to look out for is water ingress, which may be pretty harmful to your vehicle if left unattended.
There are several ways in which water can make it through your system, affecting several components of your vehicle – including the ABS sensor or any other element that may be vital for the correct functioning of your Jeep.
If this is what you suspect may be the issue, we highly recommend you inspect the ECU connectors first. You should also take a look at the terminals and straps of the battery and make sure to clean the whole area very well.
Wait a little while, and try to start the vehicle again. The warning should not be a problem anymore.
5. Obsolete Software or Glitches
If you’ve been neglecting system updates for a while, then you’ve found the source of the problem.
Sometimes, the issue may also be caused by a glitch, which means that you can easily solve it by resetting your vehicle’s system.
You can do this by uncoupling the terminals of the battery and then reattaching them after waiting for 30-40 minutes.
If you think that there could be a software-related problem with your Jeep Renegade, then we highly recommend you get in touch with your dealership and find out more about the updates applied to your vehicle.
6. Problems with the Angle or Airbag Sensors
Lastly, there are two additional components that you may want to check out: the angle and airbag sensors.
Firstly, the airbag sensor may sometimes become faulty, which may lead to the Jeep Renegade Dynamic Steering Torque Service Required error message.
It is because the ECU system is receiving incorrect data, and that may mess up the steering torque nitty-gritty and make the message pop up.
If you think the airbag sensor may be the issue, we highly recommend you inspect it and make sure that the wires are all okay. If they’re not, you may have to do a few replacements and fixes to make the error notification disappear.
On the other hand, the angle sensor may also send bad data to the ECU, which produces the error since the DST can’t fulfill its main purpose as intended.
You will typically receive the error message immediately if this is the cause of your problem.
This case requires you to replace the angle sensor. That will cause the error to disappear completely, allowing you to continue enjoying your deep without problems.
What Else Should You Take into Account?
While we’ve explained how you can fix the majority of the issues that could cause this error, you may also want to consider other possibilities to make sure that the issue stops and you can start working as intended again.
We highly recommend you update your Jeep’s software. As we mentioned above, the issue may be caused by obsolete software.
You may want to update your DST system at a reliable dealer shop.
If this is the cause of your issue, then it may disappear pretty much immediately after you’ve received the software update.
We also advise you to keep up with the latest news from the company to see if there’s anything new and you’re missing out on something.
Conclusion
Our vehicles are machines, and they’re prone to errors and malfunctions all the time, which may be frustrating.
However, most issues have a solution, and that is the case for the Jeep Renegade Dynamic Steering Torque Service Required error message.
While there are several causes, most of the time, a faulty component or a system error may be the source of it all. We highly advise you to invest in an OBD2 scanner to make the inspection process less complicated and daunting.
A recommendation we have is the MOTOPOWER OBD2 Scanner Code Reader, which is pretty popular among the customers.
It may be a bit complicated to find the root of the issue, especially because the error message doesn’t tell you exactly where the problem originates.
Thus, you may have to run several diagnoses and other inspections to finally find the cause and solve it as soon as possible.
Make sure to diagnose and fix the issue as soon as possible to ensure your safety on the road.
Last update on 2026-01-05 / Affiliate links / Images from Amazon Product Advertising API
