The Renegade is one of the most popular Jeep models right now, especially the models from 2015, 2016, and 2017.
Even in the newer models, you will find a warning light that will notify you if there is something wrong with your parking brake, in orange or red color.
This service electronic parking brake Jeep Renegade issue has become fairly common in recent years, particularly in the 2016 models for the Jeep Renegade and Compass.
When this message appears, it means that there is something wrong with the electronic parking brake. Your vehicle is recommending you seek assistance from a professional. It could be due to several reasons, from an actual problem with the brakes to even issues with the battery.
This issue can be an indicator of other underlying problems, but it may also be a false positive. If you’re not sure of what this problem means and would like to make the notification disappear, then here’s what you need to know about it!
What Is Service Electronic Parking Brake Jeep Renegade Warning Mean?
Sometimes, whenever you start your Jeep or have been driving for a while, a warning will pop up. A “P” with an exclamation sign along with the phrase “Service Electronic Parking Brake.”
This is an intermittent notification, which may make it seem urgent (and, in some cases, it may be).
Most of the time, users who experience these problems report not having any particular issue with their vehicles. The warning appears out of nowhere without an apparent reason.
Typically, if this light is on, it means that the brake needs your attention, and you should get it inspected as soon as possible to prevent any potential problem from happening.
You can conduct some tests and see if there’s an issue with your car or if there’s a glitch with the system that makes it send the notification so frequently.
If this light has started to pop up intermittently or permanently in your notifications panel, it could mean one of the following reasons:
- Adjustments on the brake lever or pedal may be needed. If you believe your brake lever needs a replacement, check out parking brake lever kit so you can replace it yourself.
- You may need to replace the brake pads as they have become too worn down.
- The hydraulics have started to become faulty, and they’re starting to lose pressure or fluid.
As you can see, some of the solutions to the problem are a bit more obvious than others, but it’s still worth taking a couple of hours to check the condition of your Renegade and look for other potential signs of damage.
If, once you inspect your vehicle, you find out that your brake pads need to be replaced, we recommend you do so as soon as possible. This way, you can ensure your safety on the road.
Furthermore, waiting until your brake pads are completely worn out may also increase the costs of the repairs.
3 Common Fixes for Service Electronic Parking Brake Issue
This issue is sometimes accompanied by several other problems which prevent you from turning on your Jeep.
If that’s the case, maybe one of the solutions we’ll list below will help you solve the issue.
Let’s take a look at them:
1. Brake Service Warning Light Always On
If the brake service warning light is always visible, then that means that there is probably something wrong with the parking brake.
You should inspect the components as soon as possible if you’ve noticed that this has been happening for a while.
The reason for this could be loss of pressure or fluid, worn-out brake pads, or maybe that the brake lever or pedal needs a bit of an adjustment, which isn’t complicated to do and may not require you to take your car to a professional.
If, after inspecting the brake pads, you find out that they are worn out, perhaps it is time to replace them for your safety.
As mentioned, it is recommended to do it as soon as possible, as waiting until the brake pads are completely broken may cost you even more in the future.
Another possibility is that the brake system may be losing pressure or fluid, which means that you may not be able to stop your vehicle at one point.
Thus, you should get this issue solved as soon as you can to prevent an unfortunate accident.
2. Light Illuminates When You Hit the Pedal
If the problem starts when you hit the pedal, perhaps it is due to hydraulic loss. It may also originate from low levels of brake fluid, which means that you may have to replenish it.
If there is no brake fluid available on the master cylinder, you may lose the ability to stop altogether.
As discussed, you must work on this issue as soon as it appears to prevent dangerous situations.
3. Antilock Braking System (ABS) is On
Another problem you may be experiencing without noticing may be related to the antilock braking system or ABS.
The ABS light only turns on whenever there’s a critical problem with such components, which means that you may have the brake system checked urgently.
You may have to take your car to the dealer, as these faults may be too intricate for the regular user to fix. In the worst-case scenario, the whole ABS speed sensor may have to be replaced.
What If None of the Above Problems Apply to You?
As we mentioned above, sometimes, the problem appears out of nowhere, and the solution may be simpler than you think.
Some users report having the light suddenly appear on their vehicles, even when there is no apparent issue on their vehicles.
One user at the Jeep Renegade forum had this problem, and before he took his Jeep to the dealer service, he decided to try the following procedure to get rid of the problem:
Renegade forum
- Firstly, he disconnected the negative battery connector.
- He reconnected it after a few minutes.
- Once the connector was reinstated, the user said that the problem went away.
This issue probably means that the problem was never too complicated; it probably was that the battery connector was too loose or improperly connected the whole time.
Therefore, if you think that your vehicle is in top condition and that there is no reason for it to be malfunctioning, you can give this a try and see how it works out for you.
4 Step Process for Turning Off the Parking Brake on Jeep Renegade
Another problem that users may be experiencing that may not necessarily be the Jeep electronic parking brake service warning, but that could be related to it is the parking brake mode, which can be a bit bothersome in certain situations.
This feature is included in the Jeep Renegade and other Jeep models to enhance the safety of the user and prevent accidents from happening. However, it may be suddenly activated in situations where it is not needed.
The main function of this feature is to avoid rolling whenever the vehicle is parked on an incline.
The system will activate once the vehicle is turned off and you exit your Jeep. While it can be useful, it may also become an annoyance at certain times.
You can easily deactivate it by following the steps written below:
1. Activate the Ignition
First, activate the ignition and wait a few moments until the warning lights start deactivating. Your Jeep needs to be in park mode for this process.
We recommend you be familiar with the manufacturer’s instructions so that you can avoid generating any damage to your vehicle.
2. Depress the Brake Pedal
The next step is to depress the brake pedal. This way, you’ll ensure that your Jeep will remain in the same place during the whole process.
You’ll have to maintain your foot on the brake pedal until the end.
3. Pull the EPB switch
Now, it is important to pull the electronic parking brake (EPB) switch. You will find it near the center console of your Jeep.
You can deactivate the auto-park brake if you pull the switch in your direction.
You will then see a light that indicates that this system has been turned off. You may also hear a sound.
4. Stop Depressing the Brake Pedal
Once you’ve turned off the auto park brake system, you can now slowly release the brake pedal. Ensure that the area is clear and that no obstacles are in the area before you do so.
It’s important to note that the instructions we’re providing here are general and may not apply to the model of your vehicle.
We recommend you read the manufacturer’s instructions that are specific to your Jeep Renegade model for more information.
What Else Should You Take into Account?
If you’ve tried some of the fixes we’ve mentioned in the article and the Renegade electronic parking brake service mode problem persists, then maybe it’s time to take your vehicle to the dealership, as the brake system may be compromised.
It’s not completely safe to drive your vehicle while the brake warning light is on, as it may indicate a potentially dangerous problem.
Plus, it’s not recommended to drive your vehicle while the brake system is failing since it can lead to more expenses or brake failure, causing you to end up paying more money than you would if you had the problem solved when you first noticed it.
If you’re unable to drive your vehicle to the repair shop, we highly recommend you call a mobile brake repair service so that you can receive the assistance you need as soon as possible.
Conclusion
It’s crucial to keep an eye on your car’s brake system, as it allows you to stop when necessary and makes the driving experience safer and enjoyable.
If you notice that the ‘service electronic parking brake’ warning light is on, maybe you should inspect your Jeep as soon as possible and rule out any major damage.
Lastly, if the problem is too complex to fix, it’s highly recommended to seek professional assistance.
Try not to drive your Jeep at high speeds or do so with the most precaution possible while this warning is still on.
Last update on 2025-08-29 / Affiliate links / Images from Amazon Product Advertising API
