How To Remove 2020 Jeep Doors: Step-by-Step Guide

We sometimes use affiliate links to products and services on retailer sites for which we can receive compensation if you click on those links or make purchases through them.

Removing the doors from your 2020 Jeep is a popular upgrade for many owners. It adds freedom, improves visibility, and gives your ride a unique look. However, the process needs care and the right steps. If done wrong, you risk damaging your Jeep or hurting yourself.

This guide shows you how to remove your 2020 Jeep doors safely, even if you are a beginner.

Tools And Preparation

Before you start, gather these tools:

how to remove 2020 jeep doors
  • Torx T50 bit
  • Ratchet or wrench
  • Safety gloves
  • Soft cloth or towel
  • Storage bag (for bolts and hinges)

Check your Jeep’s manual for location of tools and bolts. Most 2020 Jeeps come with a toolkit under the rear seat. Make sure you park on level ground and turn off the engine. Remove any valuables from the door pockets.

Step-by-step Door Removal Process

1. Remove The Door Panel Screws

Open the door wide. Look for the black bolts at the bottom of the door hinges. These bolts secure the door to the frame. Use your Torx T50 bit and ratchet to loosen and remove them. Place the bolts in your storage bag so you don’t lose them.

2. Disconnect The Wiring

Each Jeep door has an electrical plug for windows and locks. Locate the plug inside the door jamb. Press the small tab to release the connector. Gently pull it out, making sure not to tug on the wires. Lay the connector aside.

3. Remove The Door Check

The door check is a metal strap that keeps the door from swinging too far. Find it between the door and frame. Use your wrench to remove the bolt holding the strap. Set the bolt aside.

4. Lift The Door Off

Grip the door firmly from both sides. Lift straight up and away from the Jeep. The door may be heavy, so get help if needed. Place the door on a soft towel to avoid scratches. Repeat these steps for each door.

5. Store The Doors Safely

Keep your Jeep doors in a dry, secure place. Use a padded cover if available. Store the bolts and connectors together so you can reinstall the doors later.

Key Safety Tips

  • Always wear safety gloves to protect your hands.
  • Be careful not to damage the paint or wires.
  • Never rush the process. Take your time with each step.
  • If you are unsure, ask a friend for help or check your manual.

Common Mistakes And How To Avoid Them

Many beginners make small errors that can cause big problems:

  • Forgetting to disconnect the wiring before lifting the door. This can break the connector.
  • Losing bolts or screws. Always use a storage bag.
  • Dropping the door. Place a towel under the door for protection.
  • Not checking local laws. Some places require mirrors even with doors off.
How To Remove 2020 Jeep Doors: Step-by-Step Guide

Comparison: Jeep Door Removal Vs. Other Vehicles

Here’s how the Jeep compares to other vehicles when removing doors:

Vehicle Door Removal Time Tools Needed Skill Level
2020 Jeep Wrangler 20-30 minutes Torx T50, wrench Beginner
Ford Bronco 35-45 minutes Torx, wrench Intermediate
Toyota Tacoma Not designed for removal N/A Not advised

2020 Jeep Door Removal Data

Some owners wonder how often people remove Jeep doors and why. Here’s a quick breakdown:

Reason % of Owners Season
Off-road adventure 45% Spring/Summer
Style and appearance 30% Year-round
Easy access 15% Summer
Other 10% Varies
How To Remove 2020 Jeep Doors: Step-by-Step Guide

Practical Insights And Tips

Most guides say removing Jeep doors is easy, but here’s what beginners often miss:

  • The weight of the doors can surprise you. Even front doors weigh over 40 pounds.
  • You need to keep the side mirrors legal. With doors off, mirrors are often gone. Buy clip-on mirrors before you remove the doors.
  • After removal, door sensors may beep. This is normal. If it bothers you, check your manual for ways to turn off the sensor.

Some owners report scratches on the hinges after removal. To avoid this, wrap the hinges with a soft cloth as you lift the door.

Reinstalling The Doors

Putting the doors back is just as important as taking them off. Here’s how:

  • Line up the hinges and lower the door carefully.
  • Reconnect the door check strap.
  • Attach the wiring plug until it clicks.
  • Tighten the bolts with your Torx T50 bit.
  • Test the windows and locks to make sure everything works.
How To Remove 2020 Jeep Doors: Step-by-Step Guide

Frequently Asked Questions

Can I Drive My Jeep With Doors Off?

Yes, but check local laws. Some states require side mirrors and other safety features.

Will Removing The Doors Void My Warranty?

No, removing the doors is allowed. However, damage caused during removal is not covered.

How Long Does It Take To Remove All Four Doors?

Usually 20-30 minutes for beginners. With practice, you can finish faster.

Do I Need Special Mirrors After Removing The Doors?

Yes. Without doors, the factory mirrors are gone. Buy clip-on mirrors for legal driving.

Is It Safe To Store The Doors Outside?

No. Moisture and sunlight can damage the paint and wiring. Use a padded cover and keep them indoors.

Removing your 2020 Jeep doors is a fun project that gives your Jeep new personality. Always follow the steps carefully, use the right tools, and pay attention to local laws. With these tips, you can enjoy open-air driving and keep your Jeep in top shape. For more expert advice, visit the Jeep Official Site.

Photo of author
Hi there, my name is Nikola. I've spent more than a decade covered in grease and with a big smile on my face, as I've been exploring everything that has an engine. Although Jeeps are my favorite, I have a deep love for all things automotive.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.